Know your way around your inflatable pool toys
HOW YOUR INFLATABLE LOUNGER WORKS
INFLATING YOUR INFLATABLE POOL LOUNGER
Inflating the Floaty Inflatable pool chair is a breeze. Literally! All it takes is a few swipes through the air, and you can catch enough to fill the pool loungers. There are two separate openings which are filled one at a time.
Hold the inflatable pool lounger so the pockets are parallel to the ground, and open the top pocket to grab some air, while keeping the bottom pocket opening closed. Once the giant inflatable pool lounge feels like its filling up, then you promptly close the pocket, flip it over so the empty pocket is on top and do the same thing.
Don’t swing your inflatable pool chair around to fill because it bends the tube and the air escapes. Try to keep your pool lounger straight and just move in one direction. After both pockets are full, simply roll the open side 2 or 3 times depending on firmness, and connect the buckle. That’s it! No pumps needed. If you want to fill it easily indoors just put the inflatable lounger in front of a fan or use a hair dryer (on no heat setting) to fill it.
If there is even a slight breeze, make sure to stand in the direction that will allow the breeze to blow into the inflatable pool chair. You will be amazed at how quickly the pool inflatable lounger is to setup.
DEFLATING AND PACKING YOUR INFLATABLE POOL LOUNGER
Packing up the Inflatable lounger is just as easy as setting it up. Simply undo the buckle and the lounger will start to deflate.
When deflated, grab the non-opening end of your pool lounger and tightly roll to the other end. Maintain a tight, uniform roll so the inflatable lounge chair will fit properly in the carrying case. When rolled up, bring the ends together and reconnect the securing buckle. Slide the Inflatable pool lounge back into the carrying case, and you’re ready to go!
INFLATING YOUR POOL TOYS
What is a pool party without a fully blown up pool toy for the little ones? Pool floats i.e inflatable swan, inflatable donut and inflatable donut etc, require plenty of air to help them hold their form, and to provide support for the person who uses it.
There are a couple of ways to inflate your inflatable pool toys. An excellent way to inflate a pool float is to use a floaty air pump. Simply spread out the blow up pool toy to remove kinks, ensuring the whole pool inflatable lies flat. For particularly large inflatable pool toys, bring it out to the yard so that no obstructions impede its inflation.
Bring the air pump out, and power it using a long extension cable plugged into a wall outlet. Take the air pump hose together with any valve. For efficiency and effective pumping we recommend you use a valve that fits firmly onto the blow up pool toys pumping valve. Attach it firmly into the pumping valve and turn on the air pump.
The air pump automatically fills the giant inflatable pool toy. Allowing time for the air to come in the swimming floats, when the pool toy has fully inflated, seal it using the plug attached to the pumping valve. This method is a time saver, taking only a few minutes to inflate large pool floats effectively.
DEFLATING YOUR INFLATABLE POOL TOYS
Deflating the giant inflatable is just as easy as setting it up. Simply undo the pump valve which was sealing the air in the water toy and the pool float will start to deflate.
When deflated, grab any end of your pool lounger and tightly roll or fold to the other end. Maintain a tight, uniform roll or fold so the inflatable lounge chair will be easy to put in its box. Slide the Inflatable pool toy back into the box, and you’re ready to go!